The advantage of GRIP-D repair clamps is that is can befitted to existing pipes in situation, without any need to remove and replacing pipes, GRIP-R pipe repair clamp can repair the pipes that are ageing and corrosive and pipe wall has holes or cracks An. When installing it, it only needs pipe clamp to wrap the leakage part and tighten the bolt. Then the installation is finished ideally and reliably.
| Breet | ||||||||||||
| Odo |  |  | B | C | ||||||||
| (Mm) | (Mm) | M | ||||||||||
| 18 Joer | 16 | 30 | 204 | 142 | 250 | 75 | 10 ~ 25 | 40 | 60 | |||
| 200 | 16 | 30 | 224 | 142 | 250 | 75 | 10 ~ 25 | 40 | 60 | |||
| 16 | 30 | 142 | 250 | 75 | 10 ~ 25 | 40 | 60 | |||||
| 250 | 16 | 25 | 282 | 142 | 250 | 75 | 10 ~ 25 | 40 | 80 | |||
| 267 | 16 | 25 | 2999 | 142 | 250 | 75 | 10 ~ 25 | 40 | 80 | |||
| 16 | 25 | 3055 | 142 | 250 | 75 | 10 ~ 25 | 40 | 80 | ||||
| 3044 | 10 | 20 | 3366 | 142 | 250 | 75 | 10 ~ 25 | 40 | 80 | |||
| 10 | 20 | 142 | 250 | 75 | 10 ~ 25 | 40 | 80 | |||||
| 8.5 Auer Méi | 16 | 142 | 250 | 75 | 10 ~ 25 | 40 | 80 | |||||
| 3777 | 8.5 Auer Méi | 16 | 409 | 142 | 250 | 75 | 10 ~ 25 | 40 | 80 | |||
| 7.5 | 16 | 438 | 142 | 250 | 75 | 10 ~ 25 | 40 | 80 | ||||
| 6.5 | 12 | 489 | 142 | 250 | 75 | 10 ~ 25 | 40 | 80 | ||||
| 50,8 | 6 | 10 | 540 | 142 | 250 | 75 | 10 ~ 25 | 40 | 120 | |||
| 5.,5 | 10 | 142 | 250 | 75 | 10 ~ 25 | 40 | 16,0 | |||||
| 5 | 10 | 142 | 250 | 75 | 10 ~ 25 | 40 | 16,0 | |||||
| 4 | 5 | 142 | 250 | 75 | 10 ~ 25 | 40 | 16,0 | |||||
| 7622 | 4 | 5 | 794 | 142 | 250 | 75 | 10 ~ 25 | 40 | 16,0 | |||
| 4 | 5 | 142 | 250 | 75 | 10 ~ 25 | 40 | 16,0 | |||||
| 4 | 5 | 142 | 250 | 75 | 10 ~ 25 | 40 | 16,0 | |||||
| 1016 | 4 | 5 | 1048 | 142 | 250 | 75 | 10 ~ 25 | 40 | 200 | |||
| 3,5 | 5 | 142 | 250 | 75 | 10 ~ 25 | 40 | 200 | |||||
| 3,5 | 5 | 142 | 250 | 75 | 10 ~ 25 | 40 | 200 | |||||
| 3 | 5 | 1352.8 | 142 | 250 | 75 | 10 ~ 25 | 40 | 240 | ||||
| 3 | 5 | 1454.4 | 142 | 250 | 75 | 10 ~ 25 | 40 | 240 | ||||
| 2.5 | 5 | 142 | 250 | 75 | 10 ~ 25 | 40 | 240 | |||||
| 2.5 | 5 | 1657,6 | 142 | 250 | 75 | 10 ~ 25 | 40 | 240 | ||||
| 1722-1732 | 2.5 | 5 | 142 | 250 | 75 | 10 ~ 25 | 40 | 240 | ||||
| 72.000 | 2 | 5 | 142 | 250 | 75 | 10 ~ 25 | 40 | 240 | ||||
| 1925-1935 | 2 | 5 | 1962.4 | 142 | 250 | 75 | 10 ~ 25 | 40 | 240 | |||
| 2032 | 2027-2037 | 2 | 5 | 2064 | 142 | 250 | 75 | 10 ~ 25 | 40 | 240 | ||
Grip-d materiell Auswiel
| V1 | V2 | V3 | V4 | V5 | V6 | |
| Bolzen | ||||||
| Baren | ||||||
| Ancheen Ring | ||||||
| Sträifen Insert (fakultativ) | Aisi 301 | Aisi 301 | Aisi 301 | Aisi 301 | Aisi 301 |
| Temperaturbereich | ||
| Ephm | -30 ℃ bis + 120 ℃ | |
| -30 ℃ bis an 120 ℃ | ||
| Mvq | -70 ℃ bis + 260 ℃ | |
| FPM / FKM |